The Silkland DP80 DisplayPort Cable review is for gamers who want a short cable rated for high-bandwidth DisplayPort 2.1 connections.
Its 1.6-foot length and 80Gbps specification suit a nearby PC-to-monitor link, provided both devices can use the relevant features.
Silkland DP80 Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short DisplayPort cable for gamers building a close-range setup around compatible DP 2.1 graphics cards and high-refresh monitors.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-rate specification and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz.
- Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST, with uncompressed 7.1, 5.1, and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors have a no-latch design; the cable uses 28AWG tinned copper conductors, triple shielding, and a nylon exterior.
Pros
- High stated bandwidth and support for demanding refresh-rate and resolution combinations.
- Short length can reduce excess cable on a close PC-to-monitor connection.
Consider before buying
- At 1.6 feet, it is unsuitable when the computer and display need more separation or a longer routed path.
- The highest listed display modes depend on matching capabilities and settings across the graphics card and monitor; DSC is required for several of them.
Read the full review summary
This cable combines VESA certification, DisplayPort 2.1 support, a stated 80Gbps data rate, and an unusually short 1.6-foot reach.
Its headline display modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher modes such as 16K at 60Hz and 4K at up to 540Hz are listed with DSC enabled.
These are capability targets, not a guarantee that every computer and display will run them.
It is most compelling for a tidy desk where the PC sits close to the monitor and both ends have suitable DisplayPort hardware.
The no-latch connectors, braided exterior, backward compatibility, and support for gaming features make it a considered choice for a direct connection.
Buyers with a longer cable route should prioritize reach, while buyers planning to use the highest modes should confirm the GPU, monitor, and settings support the same resolution, refresh rate, and compression requirements.
The buying factors
Silkland DP80 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Display bandwidth headroom
The 80Gbps rating and DP 2.1 UHBR20 support position it for demanding display modes, subject to compatible source and display hardware.
Short-run desk fit
A 1.6-foot cable can keep a nearby connection compact, but offers little flexibility for equipment placed farther apart.
Gaming feature coverage
VRR, ALLM, FEC, DSC 1.2a, and MST are listed, giving compatible setups several useful display options.
Build and handling
Tinned copper, triple shielding, a nylon exterior, and latch-free plugs suggest a durable design with easier removal.
Device compatibility
It is backward compatible with DP 2.0 and 1.4 and is intended for DP-equipped PCs, graphics cards, and monitors.
Setup flexibility
The short length is purpose-built for close placement and limits routing options in larger or more complex desk layouts.
Key Features and Specifications of Silkland DP80
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-rate specification and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz.
- Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST, with uncompressed 7.1, 5.1, and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors have a no-latch design; the cable uses 28AWG tinned copper conductors, triple shielding, and a nylon exterior.
- The 1.6-foot DP-to-DP cable is backward compatible with DisplayPort 2.0 and 1.4.
- Silkland lists a 24-month service period and technical support within 18 hours.
Pros and Cons of Silkland DP80
Pros
- High stated bandwidth and support for demanding refresh-rate and resolution combinations.
- Short length can reduce excess cable on a close PC-to-monitor connection.
- No-latch plugs avoid a release mechanism when connecting or disconnecting.
- Broad gaming feature support, including VRR, ALLM, DSC, and MST.
- Braided nylon exterior, triple shielding, and tinned copper construction.
Consider before buying
- At 1.6 feet, it is unsuitable when the computer and display need more separation or a longer routed path.
- The highest listed display modes depend on matching capabilities and settings across the graphics card and monitor; DSC is required for several of them.
- The no-latch design may be less reassuring for a connection that needs a locking plug to resist accidental pulling.
Who Should Buy Silkland DP80?
Good fit
Choose the Silkland DP80 if your PC sits close to a DisplayPort monitor and you want a compact cable with substantial bandwidth headroom.
Its 80Gbps DP 2.1 specification and listed UHBR20 support make it a sensible fit to consider for a high-refresh gaming display, especially if your setup can take advantage of features such as VRR and DSC.
Before buying for a specific resolution and refresh rate, check the output capabilities of the GPU and the input capabilities of the monitor, including whether DSC is needed for your target mode.
Also measure the actual route between devices, allowing enough slack for connections and movement; the short reach is the main practical constraint.
Who should skip it
Skip this length if your PC is under a desk, mounted away from the display, or connected through a route that needs extra slack. A longer cable will be a better physical fit.
Look elsewhere if you need a DisplayPort cable with a locking latch, or if either device lacks the DisplayPort support required for your intended mode. Check device specifications before choosing a cable based on headline resolution figures.
How the Silkland DP80 Fits a High-Refresh Gaming Setup
Bandwidth and display modes
The 80Gbps rating is the key distinction in this cable’s specification. The product lists uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, while its higher 16K and 8K modes and faster 4K options require DSC.
Buyers should treat these as combinations the cable supports within a compatible system, then verify the graphics card’s output and monitor’s input for the exact mode they plan to use.
Gaming features depend on the whole chain
VRR, ALLM, FEC, DSC 1.2a, and MST broaden the feature set for gaming and multi-monitor configurations. The cable can carry a signal, but the source, display, and configuration determine whether a particular feature is available.
If a setup uses multiple screens, confirm that the devices and operating system support the intended MST arrangement; the cable description also recommends keeping the connection type consistent across screens.
A short cable rewards careful placement
At 1.6 feet, this is intended for a direct, nearby connection. That can make a compact desk easier to keep tidy, but the length leaves little room for routing around furniture or moving a monitor.
Measure the complete path before ordering, including connector clearance and any planned monitor movement.
Construction and connector handling
The cable pairs 28AWG tinned copper with triple shielding and a nylon exterior, while the connectors use a latch-free design.
These choices are aimed at a robust, convenient everyday connection; no-latch plugs can be simpler to release, though buyers who prefer a locking connection should consider that handling preference.
The listed 24-month service period and technical support are additional points to weigh.
Alternatives to Silkland DP80
One useful alternative is included because the supplied option offers a clear longer-reach tradeoff; compare other cable lengths if your layout needs a different fit.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps 16K DisplayPort Cable, 10 ft
Consider the 10-foot model when the PC and monitor are farther apart and that extra reach matters more than the DP80’s higher bandwidth rating.
For a short run aimed at the DP80’s listed high-refresh modes, the DP80 is the closer match; compare the target display mode against both devices before deciding.
- This 10-foot Silkland cable has a 54Gbps rating and lists 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
- It supports DSC 1.2a, Dynamic HDR, and backward compatibility through DisplayPort 1.0; its connectors have a no-buckle design and its exterior is double nylon braided.
- The DP80 is a 1.6-foot cable rated at 80Gbps, with uncompressed 4K at 240Hz listed among its supported modes.
Is Silkland DP80 Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a close-range gaming setup that needs a short DP-to-DP connection and wants the headroom of an 80Gbps DP 2.1 cable.
Its feature set and construction make it a capable on-paper fit for compatible high-refresh displays.
Its 1.6-foot length is a decisive constraint, and the highest listed modes depend on the GPU, monitor, and DSC support working together.
Measure the route and confirm the exact display mode first; if both checks line up, this cable is a strong candidate for a compact setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short DisplayPort cable for gamers building a close-range setup around compatible DP 2.1 graphics cards and high-refresh monitors.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-rate specification and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz.
- Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST, with uncompressed 7.1, 5.1, and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors have a no-latch design; the cable uses 28AWG tinned copper conductors, triple shielding, and a nylon exterior.